By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, all applicable laws and regulations, and agree that you are responsible for compliance with any applicable local laws.
If you do not agree with any of these terms, you are prohibited from using or accessing this site.The materials contained in this
web site are protected by applicable copyright and trademark law.
2. Use license
2.1 Permission is granted to temporarily download one copy of the materials (information or software) on our web site for personal, non-commercial transitory viewing only.This is the grant of a license, not a transfer of title, and under this license you may not:
2.2 This license shall automatically terminate if you violate any of these restrictions and may be terminated by Spacecrafts at any time. Upon terminating your viewing of these materials or upon the termination of this license, you must destroy any downloaded materials in your possession whether in electronic or printed format.
The materials on our web site are provided "as is". Spacecrafts makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties, including without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, or non-infringement of intellectual property or other violation of rights.
Further, Spacecrafts does not warrant or make any representations concerning the accuracy, likely results, or reliability of the use of the materials on its Internet web site or otherwise relating to such materials or on any sites linked to this site.
In no event shall Spacecrafts or its suppliers be liable for any damages (including, without limitation, damages for loss of data or profit, or due to business interruption,) arising out of the use or inability to use the materials on Spacecrafts web site, even if Spacecrafts or a Spacecrafts authorized representative has been notified orally or in writing of the possibility of such damage. Because some jurisdictions do not allow limitations on implied warranties, or limitations of liability for consequential or incidental damages, these limitations may not apply to you.
5. Revisions and errata
The materials appearing on our web site could include technical, typographical, or photographic errors. Spacecrafts does not warrant that any of the materials on its web site are accurate, complete, or current.
Spacecrafts may make changes to the materials contained on its web site at any time without notice. Spacecrafts does not, however, make any commitment to update the materials
Spacecrafts has not reviewed all of the sites linked to its Internet web site and is not responsible for the contents of any such linked site.The inclusion of any link does not imply endorsement by Spacecrafts of the site. Use of any such linked web site is at the user's own risk.
8. Taking care of your furniture
8.1 Wood & Veneer
9. Our quality promise
We design and create high-quality furniture at very affordable prices - but not at the expense of our planet, or the people who work hard to make the products for us. Our specially-trained Quality Guardians make sure of it.They regularly visit our manufacturers, wherever they are in the world, to check the quality of the materials and where they're being sourced from.
9.1 Order from spacecraftsfurniture.com and you can be sure that:
All our wood is responsibly sourced. We never use illegally-felled wood or wood from endangered species of trees.
10. Material care
10.1 Care + Maintenance
Our philosophy is simple, we only make furniture that lasts. Over their lifetime our products will need a little care and attention to ensure they can be enjoyed by generations to come.The following information will help you care for your products in the best possible way.
Leather is a natural product characterised by the unique tone and individual markings that the animal has acquired during its life which may include creases and stretchmarks, scars and insect bites. Some softening and stretching of the leather is to be expected with use. Wipe leather with a clean, damp cloth on a weekly basis to remove dust and dirt particles that can work their way into the hide and abrade the surface. To refresh your leather, care packages specifically designed for aniline and finished leathers are available at spacecraftsfurniture.com. To treat difficult stains, we recommend contacting a specialist leather cleaner who can also assist with regular treatment of the leather to nourish and prolong the life of leather upholstery.
Regularly shape and rotate loose cushions where applicable to maintain their shape and loft. Some movement may occur with loose covers as they are designed for a relaxed look and feel. It is natural that cushion fillings will settle and seat foams will soften over time. Scatter inserts can be invigorated by laying them out in the sun to air. While specialised fabrics have been selected to contain feathers in compartments, occasionally feather quills can pierce through the covers. They can be simply removed by pulling the feather
10.4 Powder Coated Metal
Regularly wipe metal with a damp soft cloth to remove particles which can abrade the surface with wear. Avoid contact with liquid, heat and direct sunlight. Abrasive cleaning products are not recommended.
10.5 Timber with Oil Finish
Timber is a natural product that will respond to its environmental conditions. We recommend you avoid extreme variation in temperature and humidity as well as contact with liquids and heat. Regularly wipe timber to remove dust and dirt. Do not leave liquid to sit on timber surfaces as it will penetrate and may cause staining. Wipe up spills immediately with a damp cloth.The tone of the timber will alter over time with exposure to UV light, please protect timber from direct or reflected sunlight. Do not use cleaners or polishes as these may cause permanent damage or colour variation to your furniture. Take care when placing or moving unglazed ceramics and other items with an irregular base finish as they may scratch the surface. Depending on the position of the piece and the conditions within your home, we recommend treating with a nourishing oil once a year. Before you begin oiling, place a protective layer below the furniture to collect any drips and always test the oil on an inconspicuous area before applying.
10.6 Timber with Lacquer Finish
Timber is a natural product that will respond to its environmental conditions. We recommend you avoid extreme variation in temperature and humidity as well as contact with liquids and heat. Regularly wipe timber to remove dust and dirt. Do not leave liquid to sit on timber surfaces as it will penetrate and may cause staining.Wipe up spills immediately with a damp cloth. The tone of the timber will alter over time with exposure to UV light, please protect timber from direct or reflected sunlight. Do not use cleaners or polishes as these may cause permanent damage or colour variation to your furniture. Take care when placing or moving unglazed ceramics and other items with an irregular base finish as they may scratch the surface.
10.7 Reclaimed Timber
Our reclaimed timber is sourced from around India, the species varies dependant on what is available so colour tone and markings will vary accordingly. It is not advisable to sit reclaimed timber directly on carpet or flooring that may stain as the timber may leach over time.
Vacuum fabrics on a weekly basis to remove dust, dirt and any loose feathers.Treat spills and stains as soon as possible by wiping with a damp cloth, do not treat with chemical cleaners or scrub as this can alter the fabrics appearance. We recommend contacting a specialist fabric cleaner to treat difficult stains.To prolong the life of your upholstery, we recommend annual cleaning by a specialist fabric cleaner.Direct sunlight may cause colour change and aging of your fabric, for best performance we recommend positioning your furniture out of direct UV light.Please refer to the Materials Library on our website for care information specific to your fabric.
Marble is a natural stone renowned for its unique aesthetic and character.With a honed finish and light protective coating applied.Marble is naturally a porous material, making it susceptible to staining as it has an increased absorbency. It is essential that no liquids are left to sit on marble as they will penetrate the stone and cause staining. Wipe up spills immediately with a damp cloth. Clean regularly with warm soapy water, using a small amount of crème cleaner with a soft sponge or cloth for stubborn stains. Acidic liquids (orange juice, wine etc) should be avoided as they react with marble and can deteriorate the finish.
Our brass products are finished with a clear coat of lacquer to prevent tarnishing.Gently wipe clean with a soft cloth on a regular basis to remove dust and dirt particles Use Spray and Wipe or Windex to remove any difficult marks or stains.
Regularly wipe glass and mirrored surfaces with a clean lint free cloth.Colin can be used to remove any difficult marks or stains.
For more information contact us on - mail.spacecraftsfurniture.com